FAQs – Page 4 – Waldorf Music

Q: When I turn the analog filter cutoff, the filter doesn't change!

Please go to Global>System>Calibrate>Filters . Press Reset . After the reset all filter calibration data is erased, afterwards the filters should be controllable again. In rare cases, you need to calibrate and reset the filter callibration data a second time.

Q: How can I import and export patches?

Import: Copy the patches onto an SD card. Copy the patches in a way that all patches from one bank are within one folder on the card. If you have bought a sound set, copy the entire directory with the sounds to the card. If there is a subfolder with samples, copy the entire directory so that the file structure is kept. On your device, press Load>Actions>Import . Navigate to the card and mark the folder which contains the patches you want to import. Now the device asks where these files should be saved. Enter the number of the first slot into which the files should be imported. Press Import . The device now automatically imports all patches from the selected folder. If OS 2.0 or higher is installed, the samples from the sub folder will be imported automatically as well and you can also use an USB stick instead of the card. When you import an entire folder, all patches will be inserted into the slots in alphabetic order. Gaps between patches will be omitted and everything will be imported in one block. Export: Please go to Load>Actions>Export . Here, you can select and export your patches. From Version 2.0 and later, samples that belong to a patch will be exported automatically with the patch.

What is the difference between Latch and Chord Mode?

Britta2022-12-04T19:56:06+01:00October 13th, 2022|

HA-Q-IKB // In Latch Mode, a key is engaged when pressed and sustained until you hit the same key again

0

The pitch bend and mod wheel do not behave as they should, how do I calibrate them correctly?

Britta2022-12-04T19:35:35+01:00October 13th, 2022|

HA-Q-IKB // First of all, before you start, make sure the Mod wheel is at the lowest position

0

When I turn the analog filter cutoff, the filter doesn’t change!

Britta2022-12-04T19:07:16+01:00October 13th, 2022|

HA-Quantum // Please go to Global>System>Calibrate>Filters. Press Reset. After the reset all filter calibration...

0

How can I update the Panel Firmware?

Britta2022-12-04T17:11:03+01:00October 13th, 2022|

HA-Q-IKB // The panel firmware isn't updated automatically after an OS update...

0

How can I neutralize the effect of the pitch bend controller so that I can use the controller for other modulations?

Britta2022-12-04T19:47:01+01:00October 13th, 2022|

HA-Q-IKB // Open the patch where you want to neutralize the pitch bend controller.

0

How can I contol parameters through MIDI CC?

Britta2023-09-27T16:59:06+02:00October 13th, 2022|

HA-Q-I-IKB-IC // Turn a knob on the front panel or tap on the corresponding rectangle on the screen...

0

How can I import and export patches?

Britta2023-09-27T16:59:54+02:00October 13th, 2022|

HA-Q-I-IKB-IC // Copy the patches onto an SD card. Copy the patches in a way that all patches...

0

Where can I find the download section and the manuals?

Britta2023-09-27T17:17:14+02:00October 13th, 2022|

HA-ALLE // At the end of the FAQ list you will find the download links for this product.

0

Can I lift up my Quantum by the aluminum rod on the back?

Britta2024-01-17T14:37:49+01:00October 13th, 2022|

HA-Quantum // Yes, you can lift up Quantum and move it around using that rod as a handle.

0

How can I tell if there’s License SL installed on Blofeld?

Britta2022-10-05T10:30:40+02:00September 20th, 2022|

When a Blofeld Desktop has the License SL installed, the display will indicate SL LICENSED on the

0

Synthesizer. Revolutionized