/home/
Iridium EN2022-11-29T10:24:27+01:00
Specifications
YouTube Tutorial
Soundsets
Sound Demos
pictures
FAQ / Downloads

Waldorf Iridium has made the impossible possible. The mighty synth engine from Quantum is now available in a compact form. Tracing the footsteps of its bigger brother, Iridium features all the synthesis elements of Quantum as well in a rack-compatible format. The combination of the powerful engine, incredible flexibility and detailed sound shaping facilities creates sheer endless possibilities of sound. Yet, the comprehensive layout and easy-to-understand structure lets you design your own sounds in no time. Sporting a solid metal casing and the same high level of craftsmanship like Quantum, Iridium is now ready to take over studios and stages throughout the world.

Contributing another entry in Waldorf’s rich history, Iridium joins the family as a direct descendant of the PPG Wave. Though, Iridium offers much more than its ancestor. Five different synthesis models are provided by Iridium for each of the three oscillators:

  • Wavetable
  • Waveform (Virtual Analog)
  • Particle (Sampling and Granular Sampling)
  • Resonator
  • Kernels

Kernel mode has been introduced with the OS 2.0 of Quantum. This huge upgrade allows one oscillator to be turned into up to six sub oscillators. These can be interlinked through FM at audio rate and arranged in user-definable constellations. Just this upgrade alone would have provided enough additional features to create a synthesizer on its own. Now, all those functions have been integrated into Iridium as well.

Up to 7000 patches can be saved in Iridium. Patches from Quantum can be loaded in Iridium and vice-versa.

Iridium features three digital filters per voice. Two in the Dual Filter section and another one in the Digital Former. Several types are available to choose from:

  • 12 or 24dB and Lowpass/Highpass/Bandpass with optional saturation or dirtiness.
  • Various filter models are available including those from Waldorf Nave, Largo and PPG 3V.
  • The Dual Filter section can be controlled independently or together in several different link modes.
  • The Digital Former offers all the filter types and models from the Dual Filter plus unusual models like Comb, Drive, Bitcrusher and more in addition.

All filters retain a true stereo signal throughout the entire structure of the instrument.

Up and down, back and forth
6 Envelopes, 6 LFOs and many more are just waiting for being used as sources in the 40 slots of the Modulation Matrix. Each slot has one additional control amount. Modulations can be directed to almost every numerical value in Iridium. All sources and destinations can be used as many times as desired until the Modulation Matrix is full. If you ever happen to run out of LFOs or Envelopes, you can use the Komplex Modulator for generating a custom shape LFO or Envelope.

Complex, but not complicated
Even though Iridium features a staggering amount of parameters to control, everything is organized in a logic structure which is easy to master. The major controls have their own dedicated knob, while the rest is accessible through the touch screen and the encoders around. There are no long menus keeping you from doing what you had planned. Instead, you will find a workflow which you will soon miss on other synthesizers.

Hands-on
Embedded in the front panel, a 4×4 silicon pad matrix invites you to launch notes, chords, arpeggios and sequences with up to 32 steps for notes and multiple parameter lines. Direct access to the parameters is granted by the seven encoders to the left and the right hand side of the touch screen.

Take a look inside!
Iridiums large color touch screen keeps you informed at all times. Upon moving a knob, Iridium gives you an optical feedback of your changes in real-time. Filter curves move, Particle grain sizes change, Envelopes warp and much more:

  • Komplex Modulator curves can be drawn with your finger
  • Envelopes show at which point the voices currently are
  • Wavetables are displayed in comprehensive view modes
  • VU meters show which voices are used and the individual voice levels
  • Different Analyzers show the audio signal at different points

Get connected
Two Audio Outputs allow you to listen to Iridium, while two Inputs allow Iridium to process external signals. 4 CV inputs plus Gate In and Trigger In are ready to forward external signals to the Mod Matrix. Furthermore, Clock In and Clock Out will get your gear in sync. MIDI connections can be made through USB and DIN MIDI. Iridium is also equipped with a USB Host port for MIDI devices. This port also handles data exchange, in addition to the MicroSD card slot.

Once again, Waldorf have underlined their status with a new and exciting synthesizer.

Iridium is designed, constructed and made in Germany. All components used are industrial grade quality to create a reliable studio device that is made to last for many years.

Iridium

go to shop

Specifications

Specifications

  • 16-voice polyphony, duo-timbral
  • Compatible with the Waldorf Quantum synth engine

3 Oscillators
Oscillator Modes:

  • Wavetable
  • Waveform (VA)
  • Particle (Sampling and Granular Sampling)
  • Resonator
  • Kernels (up to 6 sub-oscillators which can be interlinked through FM at audio rate)

3 Stereo Filters per voice
True stereo path Dual Digital Filter:

  • Two filters with independable modes
  • 12/24dB LP/HP/BP in all combinations
  • Nave, Largo, PPG, Quantum and StateVariable models

Digital Former:

  • Filter models from Waldorf Nave, Largo and PPG in HP/LP/BP/Notch
  • Comb filter
  • Bitcrusher
  • Drive
  • RingMod
  • StateVariable mode
  • Analyzer displayed in Filter view
  • Filter curve moves when modulated (optional)
  • Sophisticated filter routing options with modulatable panning and levels

Modulators:

  • 6 Envelopes
  • 6 LFOs
  • Komplex Modulator (LFO/Envelope combination with user-definable shape)

Mod Matrix:

  • 40 slots
  • Fast assign mode
  • One additional control amount per slot
  • Identical Sources and Destinations can be used multiple times until the matrix is full

Pads:

  • 4×4 silicon pad matrix with RGB backlights
  • Pads can play notes, chords, arpeggios and sequences
  • Latch mode

Performance features:

  • Arpeggiator
  • Step sequencer with up to 32 steps for notes and parameters
  • Favorites screen for quick patch recall
  • Onscreen Mod Wheel, Pitch Bend and Aftertouch

Screen:

  • Industrial-grade highly responsive touch screen

Patches:

  • Over 1000 factory sounds
  • Capacity of 7000 patch memory slots (numbers 0000-9999 can be used)
  • Patches from Quantum can be loaded and vice-versa
  • Category filter for patch list
  • 2GB user sample flash memory

Connections:

  • 2x TS output
  • 2x TS input
  • Headphones output with Gain control
  • DIN MIDI In/Out/Thru
  • USB MIDI
  • USB host for storage and MIDI devices
  • MicroSD slot
  • Kensington® lock

CV connections:

  • 4 CV inputs plus Gate In, Trigger In, Clock In, Clock Out
  • Inputs can be used as modulation sources in the Mod Matrix

Overall:

  • Sturdy metal case with aluminum knobs
  • Dimensions: 440mm wide by 305mm depth by 85mm height (including controls)
  • Weight: 5.4kg
  • VESA 75 recepticle on the bottom (mountable on monitor stand using the VESA standard)
  • 19″ rack assembly parts available
  • 16-voice polyphony, duo-timbral
  • Compatible with the Waldorf Quantum synth engine

3 Oscillators
Oscillator Modes:

  • Wavetable
  • Waveform (VA)
  • Particle (Sampling and Granular Sampling)
  • Resonator
  • Kernels (up to 6 sub-oscillators which can be interlinked through FM at audio rate)

3 Stereo Filters per voice
True stereo path Dual Digital Filter:

  • Two filters with independable modes
  • 12/24dB LP/HP/BP in all combinations
  • Nave, Largo, PPG, Quantum and StateVariable models

Digital Former:

  • Filter models from Waldorf Nave, Largo and PPG in HP/LP/BP/Notch
  • Comb filter
  • Bitcrusher
  • Drive
  • RingMod
  • StateVariable mode
  • Analyzer displayed in Filter view
  • Filter curve moves when modulated (optional)
  • Sophisticated filter routing options with modulatable panning and levels

Modulators:

  • 6 Envelopes
  • 6 LFOs
  • Komplex Modulator (LFO/Envelope combination with user-definable shape)

Mod Matrix:

  • 40 slots
  • Fast assign mode
  • One additional control amount per slot
  • Identical Sources and Destinations can be used multiple times until the matrix is full

Pads:

  • 4×4 silicon pad matrix with RGB backlights
  • Pads can play notes, chords, arpeggios and sequences
  • Latch mode

Performance features:

  • Arpeggiator
  • Step sequencer with up to 32 steps for notes and parameters
  • Favorites screen for quick patch recall
  • Onscreen Mod Wheel, Pitch Bend and Aftertouch

Screen:

  • Industrial-grade highly responsive touch screen

Patches:

  • Over 1000 factory sounds
  • Capacity of 7000 patch memory slots (numbers 0000-9999 can be used)
  • Patches from Quantum can be loaded and vice-versa
  • Category filter for patch list
  • 2GB user sample flash memory

Connections:

  • 2x TS output
  • 2x TS input
  • Headphones output with Gain control
  • DIN MIDI In/Out/Thru
  • USB MIDI
  • USB host for storage and MIDI devices
  • MicroSD slot
  • Kensington® lock

CV connections:

  • 4 CV inputs plus Gate In, Trigger In, Clock In, Clock Out
  • Inputs can be used as modulation sources in the Mod Matrix

Overall:

  • Sturdy metal case with aluminum knobs
  • Dimensions: 440mm wide by 305mm depth by 85mm height (including controls)
  • Weight: 5.4kg
  • VESA 75 recepticle on the bottom (mountable on monitor stand using the VESA standard)
  • 19″ rack assembly parts available

Review

Review

go to Waldorf Music YouTube channel

Soundsets

Soundsets

Sound Demos

Sound Demo

go to Iridium Sounddesigner Talk – feat. Kurt Ader – KApro
Waldorf Iridium Deep Dive: Discover things that no one has ever seen before!

Pictures

To download the product images in original size, simply click on the image to start the download

download all product images

Pictures

FAQ + Download Area

FAQ + Download Bereich

We answer your most frequently asked questions about Iridium
We answer your most frequently asked questions about Iridium
Which SD card should I use?2022-09-30T15:02:35+02:00

In general, you can use any commercially available SD card.

It should be formatted FAT32 or exFAT, which is standard when you buy a card. Special certifications (high speed cards – SDXC) for increased speed are not necessary and are more likely leading to misbehavior. A simple inexpensive SDHC card is usually quite sufficient.

However, we do not recommend using an SD card for storage purposes. The USB interface is much better suited, as it is more reliable and faster.  An SD card is only needed when restoring the factory settings (full init). In this case, an SD card and a USB device are required.  Of course, it can be practical to use an SD card if a keyboard or other USB controller is already connected to the USB host interface.

Since we have not tested all SD cards and the market is quite large, it is difficult to give a comprehensive recommendation.

Where can I find the download section and the manuals?2022-12-04T20:39:26+01:00

At the end of the FAQ list you will find the download links for this product.

Are the outputs from my device balanced or unbalanced?2022-12-02T17:03:24+01:00

This device has unbalanced outputs. We recommend using it with unbalanced cables.

My device isn’t recognized via USB.2022-12-04T21:16:36+01:00

Make sure that your device is connected to your computer directly and not through a hub.

Use the rear USB ports of your computer, not the front USB ports.

Disconnect all other USB devices from your computer which aren’t needed at the moment.

Change the USB cable or try from a different computer.

On Mac: Click on About this Mac in the Apple menu. Select System Report. Go to the Hardware dropdown menu on the left and unfold it. Select USB. Check if your device is listed there.

On Windows: Press the Win key+R. Enter devmgmt.msc and press OK. Check if your device is listed there. If it shows up as an “Unknown Device” and if there’s a black and yellow warning sign, deinstall the driver. Then unplug the instrument, reboot your machine and plug it back in.

Which SD card can I use?2022-12-04T17:34:11+01:00

In general, you can use any commercially available SD card.

It should be formatted FAT32 or exFAT, which is standard when you buy a card. Special certifications (high speed cards – SDXC) for increased speed are not necessary and are more likely leading to misbehavior. A simple inexpensive SDHC card is usually quite sufficient.

However, we do not recommend using an SD card for storage purposes. The USB interface is much better suited, as it is more reliable and faster.  An SD card is only needed when restoring the factory settings (full init). In this case, an SD card and a USB device are required.  Of course, it can be practical to use an SD card if a keyboard or other USB controller is already connected to the USB host interface.

Since we have not tested all SD cards and the market is quite large, it is difficult to give a comprehensive recommendation.

How can I import and export patches?2022-12-04T17:27:51+01:00

Import: Copy the patches onto an SD card. Copy the patches in a way that all patches from one bank are within one folder on the card.
If you have bought a sound set, copy the entire directory with the sounds to the card. If there is a subfolder with samples, copy the entire directory so that the file structure is kept.

On your device, press Load>Actions>Import. Navigate to the card and mark the folder which contains the patches you want to import. Now the device asks where these files should be saved. Enter the number of the first slot into which the files should be imported. Press Import. The device now automatically imports all patches from the selected folder.
If OS 2.0 or higher is installed, the samples from the sub folder will be imported automatically as well and you can also use an USB stick instead of the card.

When you import an entire folder, all patches will be inserted into the slots in alphabetic order. Gaps between patches will be omitted and everything will be imported in one block.

Export: Please go to Load>Actions>Export. Here, you can select and export your patches.

From Version 2.0 and later, samples that belong to a patch will be exported automatically with the patch.

How can I contol parameters through MIDI CC?2022-12-04T20:29:35+01:00

Turn a knob on the front panel or tap on the corresponding rectangle on the screen with the parameter name you want to control. In the context menu that appears afterwards, press MIDI Learn CC.

Move your external control or tap the field and enter the CC number. Now the device will change the value upon incoming CC messages.

To control volume, press Layer. Tap onto the Vol rectangle in the upper left corner. Assign your CC as described above.

You can also go to Global>MIDI>Mappings and assign your CCs there.

Note that the assignment is valid globally for all patches. Make sure that you’re sending the CCs on the correct MIDI channel so that you change the values on the correct layer.

This device does not react to Program Change Messages!2022-12-04T18:44:39+01:00

You will have to use the Favorites list in order to get the Prog CH working.

Load a patch that you want to call up later. Go to a screen that is not Load/Save – for example, go to the Osc1 page.

Press on the Perform button or the central value encoder. This opens up the Favorites screen. Tap and hold an empty field to insert your current patch onto one of those fields. You can also use the Favorites function on the Load screen.

This device uses only to the entries in the Favorites lis when Prog CH messages are used. As soon as you have put the most needed patches there, you can call them up by MIDI.

How do I do 1 Volt per Octave pitch control from my modular into Iridium?2022-12-04T19:53:27+01:00

Select the chosen CV Input in the Mod Matrix as source and Pitch as destination. Set Amount to 100%.
Go to Global>Settings>CV and set CV scale to about 2V (or less) which corresponds to the 2 Oct pitch amplitude in the mod matrix.
Each CV input can be individually scaled.
Press the encoder once or twice to do fine adjustment.

For the function of the “Gate In” no special setting must be made. However, the arpeggiator must be switched off. The red LED must not be on. Just press the button again until the LED is white. This is also the reason why an Init patch works with the gate and some other patches do not.

 

How can I import patches from the DX7?2022-12-04T17:30:44+01:00

Go to Load>Actions>Import and select the .syx file on the card or USB stick. The device will now ask where to save the patches after the import and starts processing them.

Every DX7 patch will create an individual patch on the device. Settings will be imported to Osc1 Kernel.

Maybe the routing will be changed so that Osc1 bypasses the filters and goes directly into the VCA. This can be changed manually in Filters>Routing.

Note that this will only work with OS 2.0 or higher installed.

The device has crashed!2022-12-04T18:40:04+01:00

First, please update the OS. We often release a new firmware with new features and we definetly recommend to do an update. The procedure takes less than a minute. You find the latest updates in your “myWaldorf” account under “myHardware”.

The OS is really stable so crashes rarely occur. If the device crashes anyway, please generate a system logfile by pressing Global>System>Support Log. Include your name and crash date in the file name when saving. Send us your file and we will have a look at your issue.

How can I reset my Quantum/Iridium to factory settings?2022-12-04T18:52:58+01:00

Please log in to your “myWaldorf” account. Here you will find all the necessary files and instructions under “my hardware”.

Which power supply can I use?2022-12-04T17:00:57+01:00

Please use only the provided power supply. If this didn’t come with your device, please contact your dealer.

The cable between the power supply and your power socket is a common “figure of eight” or C7 plug type. If you happen to have the EU version of the PSU but live outside the EU, you can just get the matching cable to connect it to your socket. The power supply is a wide-range type for every range and combination between 110-240V and 50-60Hz.

This device can’t be powered via USB.

I have mistyped an attribute for a patch and accidentally saved it. How can I correct that?2022-12-04T18:48:00+01:00

Create a new attribute with the correct spelling and assign it to the patch it belongs to. Make sure that no patch uses the attribute with the typo. On the next reboot, the mistyped attribute will be removed from the list.

What are the four holes on the bottom of the device for? Can I connect a VESA mount here?2022-12-04T19:59:21+01:00

Iridium and newer revisions of Kyra have a VESA 75 recepticle on the bottom, that’s the standard that TV supports have. Most VESA supports support two standards at once, one with 75mm and one with 100m distance between the middles of the holes. You will have to get one that has the holes for 75mm only, otherwise that won’t fit.

There should be Vesa mounts with an arm available that can be clamped to the edge of a table, so you can position the anywhere where the arm goes, as long as it’s stable. However, we can’t tell one exact model that fits. When choosing, make sure that this support can carry the weight of your instrument safely.

You will need M4 screws for the VESA holes. Important: The screws that you use for the VESA holes must not be longer than 8mm plus the thickness of the VESA mount. Otherwise, the screws may touch the components on the board which may lead to serious damage and/or injury.

Does my device send audio via its USB connection?2022-12-02T16:52:24+01:00

No, this device only sends and receives MIDI via USB. Transferring audio via USB isn’t possible.

I need spare parts for my device, where can I get them?2022-12-02T17:25:26+01:00

In the shop you will find a detailed overview. However, ordering and shipping is only possible in Europe.

I think I have to send my device in, how do I proceed? What do I have to do when I send my unit to Waldorf from outside the European Union?2022-12-02T16:03:43+01:00

First, make sure you’ve tried all the procedures above that are related to your issue.

If nothing helps and your device is still covered by warranty, please contact the retailer where this device has been bought.

All our devices come with 2 years of warranty. Depending on local law, some retailers only cover 1 year of warranty service. If your device has been bought more than one but less than two years ago, and your dealer refuses to do a warranty service repair, please contact the distributor for your area. You will find a list of them here: https://waldorfmusic.com/en/international-distributors

If your device is out of warranty, please, use the button in the upper right corner. Please, give a precise description of the error. If it’s really necessary to send in your unit, we will issue an RMA form.

Wrap up your device safely. Ensure that it’s padded at least 5cm/2inches in ALL directions all around. Use a sturdy cardboard box and parcel tape. Do not use gaffers tape as this often becomes detached during transport. You are responsible for transport damages that result in improper wrapping. Best if you use the original padding and box, then wrap up the device as it was when you received it.

Fill out the RMA form on your computer. Print it out, sign it and put it INSIDE the box. We reserve the right to refuse working on devices which come with no error description.

IMPORTANT: When sending in your device from outside the EU

All packages must have a proforma invoice stuck on the OUTSIDE of the box. This is important for the customs duty. The contents of the parcel must be named and described exactly on the invoice, with declaration of the date of purchase and condition of the unit.

We would recommend to describe your device as defective and mark the contents of the parcel at a total value of 25€ or less. Otherwise, there will be extra fees (tax) from customs duties which we must pass onto you. No tax will be charged for goods with a value less than 25 €. Keep in mind that in case the parcel gets lost, the insurance of the post service (if applicable) will only refund the value marked in the declaration.

If the above points are not considered, please be aware that we must charge you the extra costs which arise through customs duty for storage and the additional handling etc. This would be an amount between 60 – 100 Euro.

Which SD card should I use?2022-09-30T15:02:35+02:00

In general, you can use any commercially available SD card.

It should be formatted FAT32 or exFAT, which is standard when you buy a card. Special certifications (high speed cards – SDXC) for increased speed are not necessary and are more likely leading to misbehavior. A simple inexpensive SDHC card is usually quite sufficient.

However, we do not recommend using an SD card for storage purposes. The USB interface is much better suited, as it is more reliable and faster.  An SD card is only needed when restoring the factory settings (full init). In this case, an SD card and a USB device are required.  Of course, it can be practical to use an SD card if a keyboard or other USB controller is already connected to the USB host interface.

Since we have not tested all SD cards and the market is quite large, it is difficult to give a comprehensive recommendation.

Where can I find the download section and the manuals?2022-12-04T20:39:26+01:00

At the end of the FAQ list you will find the download links for this product.

How can I update my Quantum/Iridium?2022-12-02T15:43:08+01:00

After you have logged into your “myWaldorf” account, you will find a link “myHardware” below the “licence keys”. There you will find updates, init files and much more.

Are the outputs from my device balanced or unbalanced?2022-12-02T17:03:24+01:00

This device has unbalanced outputs. We recommend using it with unbalanced cables.

My device isn’t recognized via USB.2022-12-04T21:16:36+01:00

Make sure that your device is connected to your computer directly and not through a hub.

Use the rear USB ports of your computer, not the front USB ports.

Disconnect all other USB devices from your computer which aren’t needed at the moment.

Change the USB cable or try from a different computer.

On Mac: Click on About this Mac in the Apple menu. Select System Report. Go to the Hardware dropdown menu on the left and unfold it. Select USB. Check if your device is listed there.

On Windows: Press the Win key+R. Enter devmgmt.msc and press OK. Check if your device is listed there. If it shows up as an “Unknown Device” and if there’s a black and yellow warning sign, deinstall the driver. Then unplug the instrument, reboot your machine and plug it back in.

Which SD card can I use?2022-12-04T17:34:11+01:00

In general, you can use any commercially available SD card.

It should be formatted FAT32 or exFAT, which is standard when you buy a card. Special certifications (high speed cards – SDXC) for increased speed are not necessary and are more likely leading to misbehavior. A simple inexpensive SDHC card is usually quite sufficient.

However, we do not recommend using an SD card for storage purposes. The USB interface is much better suited, as it is more reliable and faster.  An SD card is only needed when restoring the factory settings (full init). In this case, an SD card and a USB device are required.  Of course, it can be practical to use an SD card if a keyboard or other USB controller is already connected to the USB host interface.

Since we have not tested all SD cards and the market is quite large, it is difficult to give a comprehensive recommendation.

How can I import and export patches?2022-12-04T17:27:51+01:00

Import: Copy the patches onto an SD card. Copy the patches in a way that all patches from one bank are within one folder on the card.
If you have bought a sound set, copy the entire directory with the sounds to the card. If there is a subfolder with samples, copy the entire directory so that the file structure is kept.

On your device, press Load>Actions>Import. Navigate to the card and mark the folder which contains the patches you want to import. Now the device asks where these files should be saved. Enter the number of the first slot into which the files should be imported. Press Import. The device now automatically imports all patches from the selected folder.
If OS 2.0 or higher is installed, the samples from the sub folder will be imported automatically as well and you can also use an USB stick instead of the card.

When you import an entire folder, all patches will be inserted into the slots in alphabetic order. Gaps between patches will be omitted and everything will be imported in one block.

Export: Please go to Load>Actions>Export. Here, you can select and export your patches.

From Version 2.0 and later, samples that belong to a patch will be exported automatically with the patch.

How can I contol parameters through MIDI CC?2022-12-04T20:29:35+01:00

Turn a knob on the front panel or tap on the corresponding rectangle on the screen with the parameter name you want to control. In the context menu that appears afterwards, press MIDI Learn CC.

Move your external control or tap the field and enter the CC number. Now the device will change the value upon incoming CC messages.

To control volume, press Layer. Tap onto the Vol rectangle in the upper left corner. Assign your CC as described above.

You can also go to Global>MIDI>Mappings and assign your CCs there.

Note that the assignment is valid globally for all patches. Make sure that you’re sending the CCs on the correct MIDI channel so that you change the values on the correct layer.

This device does not react to Program Change Messages!2022-12-04T18:44:39+01:00

You will have to use the Favorites list in order to get the Prog CH working.

Load a patch that you want to call up later. Go to a screen that is not Load/Save – for example, go to the Osc1 page.

Press on the Perform button or the central value encoder. This opens up the Favorites screen. Tap and hold an empty field to insert your current patch onto one of those fields. You can also use the Favorites function on the Load screen.

This device uses only to the entries in the Favorites lis when Prog CH messages are used. As soon as you have put the most needed patches there, you can call them up by MIDI.

How do I do 1 Volt per Octave pitch control from my modular into Iridium?2022-12-04T19:53:27+01:00

Select the chosen CV Input in the Mod Matrix as source and Pitch as destination. Set Amount to 100%.
Go to Global>Settings>CV and set CV scale to about 2V (or less) which corresponds to the 2 Oct pitch amplitude in the mod matrix.
Each CV input can be individually scaled.
Press the encoder once or twice to do fine adjustment.

For the function of the “Gate In” no special setting must be made. However, the arpeggiator must be switched off. The red LED must not be on. Just press the button again until the LED is white. This is also the reason why an Init patch works with the gate and some other patches do not.

 

How can I import patches from the DX7?2022-12-04T17:30:44+01:00

Go to Load>Actions>Import and select the .syx file on the card or USB stick. The device will now ask where to save the patches after the import and starts processing them.

Every DX7 patch will create an individual patch on the device. Settings will be imported to Osc1 Kernel.

Maybe the routing will be changed so that Osc1 bypasses the filters and goes directly into the VCA. This can be changed manually in Filters>Routing.

Note that this will only work with OS 2.0 or higher installed.

The device has crashed!2022-12-04T18:40:04+01:00

First, please update the OS. We often release a new firmware with new features and we definetly recommend to do an update. The procedure takes less than a minute. You find the latest updates in your “myWaldorf” account under “myHardware”.

The OS is really stable so crashes rarely occur. If the device crashes anyway, please generate a system logfile by pressing Global>System>Support Log. Include your name and crash date in the file name when saving. Send us your file and we will have a look at your issue.

How can I reset my Quantum/Iridium to factory settings?2022-12-04T18:52:58+01:00

Please log in to your “myWaldorf” account. Here you will find all the necessary files and instructions under “my hardware”.

Which power supply can I use?2022-12-04T17:00:57+01:00

Please use only the provided power supply. If this didn’t come with your device, please contact your dealer.

The cable between the power supply and your power socket is a common “figure of eight” or C7 plug type. If you happen to have the EU version of the PSU but live outside the EU, you can just get the matching cable to connect it to your socket. The power supply is a wide-range type for every range and combination between 110-240V and 50-60Hz.

This device can’t be powered via USB.

I have mistyped an attribute for a patch and accidentally saved it. How can I correct that?2022-12-04T18:48:00+01:00

Create a new attribute with the correct spelling and assign it to the patch it belongs to. Make sure that no patch uses the attribute with the typo. On the next reboot, the mistyped attribute will be removed from the list.

What are the four holes on the bottom of the device for? Can I connect a VESA mount here?2022-12-04T19:59:21+01:00

Iridium and newer revisions of Kyra have a VESA 75 recepticle on the bottom, that’s the standard that TV supports have. Most VESA supports support two standards at once, one with 75mm and one with 100m distance between the middles of the holes. You will have to get one that has the holes for 75mm only, otherwise that won’t fit.

There should be Vesa mounts with an arm available that can be clamped to the edge of a table, so you can position the anywhere where the arm goes, as long as it’s stable. However, we can’t tell one exact model that fits. When choosing, make sure that this support can carry the weight of your instrument safely.

You will need M4 screws for the VESA holes. Important: The screws that you use for the VESA holes must not be longer than 8mm plus the thickness of the VESA mount. Otherwise, the screws may touch the components on the board which may lead to serious damage and/or injury.

Does my device send audio via its USB connection?2022-12-02T16:52:24+01:00

No, this device only sends and receives MIDI via USB. Transferring audio via USB isn’t possible.

I need spare parts for my device, where can I get them?2022-12-02T17:25:26+01:00

In the shop you will find a detailed overview. However, ordering and shipping is only possible in Europe.

I think I have to send my device in, how do I proceed? What do I have to do when I send my unit to Waldorf from outside the European Union?2022-12-02T16:03:43+01:00

First, make sure you’ve tried all the procedures above that are related to your issue.

If nothing helps and your device is still covered by warranty, please contact the retailer where this device has been bought.

All our devices come with 2 years of warranty. Depending on local law, some retailers only cover 1 year of warranty service. If your device has been bought more than one but less than two years ago, and your dealer refuses to do a warranty service repair, please contact the distributor for your area. You will find a list of them here: https://waldorfmusic.com/en/international-distributors

If your device is out of warranty, please, use the button in the upper right corner. Please, give a precise description of the error. If it’s really necessary to send in your unit, we will issue an RMA form.

Wrap up your device safely. Ensure that it’s padded at least 5cm/2inches in ALL directions all around. Use a sturdy cardboard box and parcel tape. Do not use gaffers tape as this often becomes detached during transport. You are responsible for transport damages that result in improper wrapping. Best if you use the original padding and box, then wrap up the device as it was when you received it.

Fill out the RMA form on your computer. Print it out, sign it and put it INSIDE the box. We reserve the right to refuse working on devices which come with no error description.

IMPORTANT: When sending in your device from outside the EU

All packages must have a proforma invoice stuck on the OUTSIDE of the box. This is important for the customs duty. The contents of the parcel must be named and described exactly on the invoice, with declaration of the date of purchase and condition of the unit.

We would recommend to describe your device as defective and mark the contents of the parcel at a total value of 25€ or less. Otherwise, there will be extra fees (tax) from customs duties which we must pass onto you. No tax will be charged for goods with a value less than 25 €. Keep in mind that in case the parcel gets lost, the insurance of the post service (if applicable) will only refund the value marked in the declaration.

If the above points are not considered, please be aware that we must charge you the extra costs which arise through customs duty for storage and the additional handling etc. This would be an amount between 60 – 100 Euro.

go to faq area for all Waldorf products

Manuals

Manual
QuickStart

Any Questions?

Any Questions?

We look forward to hearing from you!
We look forward to hearing from you!
Data privacy *
Muss zum Absenden akzeptiert werden
Go to Top