LFO - 1 single cycle

Mehr
5 Monate 1 Woche her #1 von lvbeethoven
LFO - 1 single cycle wurde erstellt von lvbeethoven
Hello,
Is it possible to have 1 single cycle on an LFO?
Basically, it seems to me that an LFO is looping. I would like to make it only apply one cycle.
Thanks for your answers :)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
5 Monate 1 Woche her #2 von paulinwales
There's no LFO one-shot mode - using the komplex modulator in "envelope" mode might give you what you want as can make all the LFO waveform shapes inside that.

Can also use KM to create a curve with 100% step for the period of one LFO cycle and use it as a mod matrix controller for the LFO, but can't see why would do that versus just using KM itself to act as a one-shot LFO.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
5 Monate 1 Woche her - 5 Monate 1 Woche her #3 von paulinwales
If the single cycle is under 2 seconds, can also do it using the delay value in an envelope:

LFO1 > dest @ depth
controller=envelope and controller amt= -depth (as above but negative)

in envelope, have no attack, no decay, full sustain, max 60s release and set the delay to the length of a single LFO cycle.

this works by using the depth from the main amount during the envelope delay, then when the envelope kicks in the controller amount cancels out the main amount as they are added together.
Letzte Änderung: 5 Monate 1 Woche her von paulinwales.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
5 Monate 1 Woche her #4 von lvbeethoven
Hello PaulinWales,
Thank you for that answer :)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.