No SysEx to blofeld via MIDI cable?

Mehr
8 Monate 1 Woche her #1 von Peter Ostry
My blofeld works with SysEx over USB but does not receive SysEx via the DIN socket (MIDI cable).
The orange indicator LED stays dark and no SysEx parameter changes are accepted.
Is this normal?
Can I change it?
 

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
8 Monate 1 Woche her #2 von Qwave
I never encountered this on my desktop and keyboard Blofelds. So this is strange and not normal.

Check if the SysEx data is really sent by the MIDI interface and the program you use. Check the cable too (better use a different one).
If you plug the MIDI cable from the MIDI interface output into the MIDI input with a MIDI monitor software, you can check the whole chain from program to interface and the cable in one go. But beware of a MIDI loop.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
8 Monate 1 Woche her #3 von Peter Ostry
Thanks for clarification. Works now.

Program is Max and a MIDI monitor is always running. I connected interface output and input and SysEx went through.

But – man! – after decades of MIDI work I've had the output cable in the input port of the interface. A whole day long. Tried different cables but always in the wrong jack :-)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.