Blofeld Notes sustain forever on USB with Logic

More
1 month 1 week ago - 1 month 1 week ago #1 by bolmehag
I connected my Blofeld via USB and created a midi track instrument in Logic Pro X. I can play the blofeld via my keyboard, but the notes sustain forever. I see that blofeld receives midi when pressing and releasing the key, but the sound just stays on.

Actually it seems like Logic is sending midi data (clock?) or /stop/start when playing and Blofled interprets that as notes. When playing a midi track the notes builds upp until the vioces are all used up.

I have also tried connecting blofeld via midi cable to a normal midi out, but the same problme occurs.

I have the latest 1.25 firmware.

/peter
Last edit: 1 month 1 week ago by bolmehag.

Please Log in or Create an account to join the conversation.

More
1 month 1 week ago #2 by Aricastudio
Have you checked your sustain pedal if plugged in. Some pedals get reversed by software. Press the pedal see if it stops the sound?
Also check the ARP on the Blofeld, Second to last knob in the bottom under mode, just turn it will show off-on-one-shot, etc. You can turn if off if set to on or hold and see if it makes a diff. Also check you Blofeld Global setting. Control+SysEx recommended.

Please Log in or Create an account to join the conversation.

Moderators: Pablo